Publicité
Les langues disponibles
Les langues disponibles
10
Install Insulation Panel
1. Measure the width of the inner side curtain with the provided ruler (FIG. 22).
2. Mark a line on the patterned side of the provided insulation panel according to the measured width in Step 1, then
cut out the insulation panel along the line (FIG. 23).
3. Place the patterned side of the insulation panel to face inside your room, then slide the insulation panel into the
frame until the panel goes into the side curtain frame completely. If the insulation panel does not slide in the
frame smoothly, trim the insulation panel then try again, until the insulation panel fits the frame (FIG. 24).
4. Repeat these instructions for the other side.
In order to minimize air leaks between the room air conditioner
11
and the window opening, suitable weather stripping(trim the
provided weather stripping into suitable size) should be applied
in case of any gaps found at the location as indicated by the
arrows in Fig. 25.
8
Installation Instructions
or
FIG. 23
Weather stripping
FIG. 22
Measure the inner width
of the side curtain
FIG. 24
FIG. 25
Publicité
