Publicité
Les langues disponibles
Les langues disponibles
2. Check condition of window: all wood parts of window
must be in good shape and able to firmly hold the needed
screws. If not, make repairs before installing unit.
3. Check your storm windows: If your storm window
frame does not allow the clearance required, correct by
adding a piece of wood as shown (FIG.2), or by removing
storm window while room air conditioner is being installed.
4. Check for anything that could block airflow
Check area outside of window for things such as shrubs, trees, or awnings. Inside, be sure furniture, drapes, or blinds
will not stop proper air flow.
5. Check the available electrical service
Power supply must be the same as that shown on the unit serial
nameplate. (See Use & Care Guide for serial plate location.) Power
cord is 48" long. Be sure you have an outlet near.
All models have a 3-prong service plug to provide proper service and
safe positive grouding. Do not change plug in any way. Do not use an
adapter plug. If your present wall outlet does not match your plug, call
a qualified electrician to make the needed change.
6. Carefully unpack air conditioner
Remove all packing material. Protect floor or other stable flat surface
with covering to prevent scratches from unit. With the aid of an
assistant, remove unit from styrofoam base and rest on protected
surface. Move and install unit with the aid of an assistant. Save
packing and shipping box for future unit storage.
Accessory Kit includes
Hardware bag(shipped inside
window support brackets)
Window support bracket (2)
Side retainer (2)
Window Filler Panel (2)
MEDIUM models only HEAVY DUTY top angle rail can be
found in carton base packaging (FIG.3)
a large flat blade screwdriver
adjustable wrench or pliers
level
Phillips screwdriver
2
Installation Instructions
Foam gasket
Window sash seal
Insulation panel (2)
Ruler
Bottom rail seal
Top angle rail
Tools Required
tape measure
pencil
Socket wrenches
FIG.2
sash
1/2" min
1-1/2" min
outer sill
storm window frame or
other obstruction
WARNING
shock. Do not use an extension cord or an
adaptor plug. Do not remove any prong
from the power cord.
115V
15A
230V
30A
HEAVY DUTY
TOP ANGLE RAIL
19" min
inner sill
board thickness as
required, along entire inner
window sill; fasten to inner
sill with two nails or screws.
Avoid fire hazard or electric
230V
230V
15A
20A
Grounding Prong
Do not, under any
circumstances, cut,
remove or bypass the
grounding prong.
FIG.3
Publicité
