Publicité
Les langues disponibles
Les langues disponibles
Connection and shutoff set for Regudis W-HTE
Accessories and spare parts
3.3
Technical data
General information
Nominal diameter
Max� operating pressure p
Max� operating temperature t
Material
Housing
Ball
Disc
Seal
4. Accessories and spare parts
You can obtain spare parts and accessories from specialist
stores�
The following item is available as accessory:
•
Replacement valve with retaining spring and colour
rings (item no. 1344780)
5. Transport and storage
Transport the product in its original packaging.
Store the product under the following conditions:
Temperature range
Relative air humidity
Particles
Mechanical influences
Radiation
Chemical influences
6. Installation
The valves are already pre-assembled in the
retaining plate�
6.1
Mounting in a cabinet
1
Attach the retaining plate to the rear wall of the
cabinet� Fixing material is included with the Oventrop
cabinet�
134468080-V01.11.2021
DN 15
10 bar
s
90 °C
s
Brass
Chrome plated brass
Ceramic
PTFE / EPDM / Silicon
-20 °C to +60 °C
max. 95 %
Store in a dry and dust-
protected place
Protected from mechanical
shock
Protected from UV rays and
direct sunlight
Do not store together with
solvents, chemicals, acids,
fuels or similar substances
Fig. 6:
Fixing in the cabinet
6.2
Wall mounting
Observe the dimensions of the Regudis W-HTE
dwelling station and the surface-mounted bonnet
when selecting the installation location�
135
Fig. 7:
Dimensions with Regudis W-HTE dwelling
station in mm
166
Fig. 8:
Dimensions with surface-mounted bonnet in
mm
1
Fix the retaining plate to the wall with suitable fixing
material�
600
44
670
15
Publicité
