oventrop W-HTE Notice D'utilisation page 13

Connection and shutoff set for Regudis W-HTE
General information
1. General information
The original operating instructions are written in German�
The operating instructions in other languages have been
translated from German�
1.1 Validity of the instructions
These instructions are valid for the connection and shutoff
set for the dwelling station Regudis W-HTE�
1.2 Scope of delivery
•
Connection and shutoff set
•
Fixing material for wall mounting
•
Operating instructions
1.3 Contact
OVENTROP GmbH & Co� KG
Paul-Oventrop-Straße 1
59939 Olsberg
GERMANY
www�oventrop�com
Technical service
Phone: +49 (0) 29 62 82-234
1.4 Symbols used
Highlights important information and further
additions�
f
Action required
•
List
1
Fixed order. Steps 1 to X.
2
Z
Result of action
2. Safety-related information
2.1 Intended use
Operational safety is only guaranteed if the product is
used as intended�
The connection and shutoff set allows you to shut off all
connections of the Regudis W-HTE dwelling station�
In addition, item no. 1344685 has a Flypass fitting for
shutting off and flushing the primary supply and primary
return�
Any use beyond and/or different from this is considered
improper use�
Claims of any kind against the manufacturer and/or his
authorised representatives for damage resulting from
improper use cannot be recognised�
Proper use also includes correct compliance with these
instructions�
134468080-V01.11.2021
2.2 Warnings
Each warning contains the following elements:
Warning symbol
SIGNAL WORD
Type and source of danger!
Possible consequences if the danger occurs or the
warning is ignored�
!
Ways to avoid the danger�
Signal words define the severity of the danger posed by a
situation�
NOTICE
Indicates a situation that can potentially result in damage
to property if not avoided�
2.3 Safety instructions
We have developed this product in accordance with
current safety requirements�
Observe the following instructions for safe use�
2.3.1 Danger due to insufficient personnel
qualification
Work on this product may only be carried out by suitably
qualified specialist tradespeople.
Due to their professional training and experience as well
as knowledge of the relevant legal regulations, qualified
specialist tradespeople are able to carry out work on the
described product in a professional manner�
Operator
The operator must be instructed in the operation of the
product by specialist tradespeople�
2.3.2 Risk of injury from improper work
Angular components, points and corners on and in the
product can cause injuries�
!
Ensure there is sufficient space before starting
work.
!
Handle open or sharp-edged components with
care�
2.3.3 Availability of the operating instructions
Every person who works with this product must have read
and apply this manual and all applicable instructions�
The instructions must be available at the place of use of
the product�
!
Pass on these instructions and all applicable
instructions to the operator�
13