PAGE HEAdER.....
CARE, CLEANING & STORAGE
CARE ANd CLEANING
When finished processing, remove the
power cord from the power outlet.
Motor base
Wipe the motor base with a clean, damp
cloth after each use. Dry thoroughly with a
soft, clean cloth.
Processing bowl and lid
Hand wash in hot, soapy water using a mild
detergent. Do not use a scouring sponge or
pad or abrasive cleaners as they will scratch
the plastic surface. The plastic parts may
occasionally be washed in the dishwasher
(top shelf only). It is not recommended on a
regular basis, as prolonged exposure to hot
water temperatures and harsh detergents will
damage and shorten the life of the plastic.
NOTE
The silicone seal is dishwasher safe
and can be left on the processing lid
during cleaning.
S Blade™ mini processing blade, dough
blade and discs
Hand wash the bowl and lid. Use the
cleaning brush accessory to scrub stubborn
foods off the blades and discs. The handle
end of the brush is designed for scraping.
To avoid accidental cuts, do not leave
S Blade™ or discs to soak in sudsy water.
The S Blade™, dough blade, discs and
disc spindle can also be washed in the
dishwasher (top shelf only).
Food stains and odors
Foods such as carrot may leave a stain on
plastic parts while other foods such as garlic
may leave a strong odor. To remove either,
soak the parts for 5 minutes in 2 liters of
water with ½ cup lemon juice added. Rinse
and wash as normal.
34
BFP800XL_IB_B11_FA.indd 34
Downloaded from
www.Manualslib.com
manuals search engine
STORAGE
•
Ensure the food processor is switched off
and the power cord is unplugged.
•
Ensure all parts of the food processor are
clean and dry.
•
Carefully grasp the S Blade™ using the
disc spindle. The S Blade™ and mini
processing blade, should be stored in the
storage box when not in use. The mini
processing bowl can be stored inside the
main processing bowl when not in use.
•
Place the lid on top of the processing
bowl but DO NOT turn clockwise to the
locked position to store as unnecessary
strain will be placed on the operating
and safety switches on the processing
bowl and the motor base.
•
Place the large food pusher, with
the small food pusher inserted, into
position in the feed chute.
•
Place the discs in the storage container
and store in a safe place out of the reach
of children to avoid accidental cuts. It is
not recommended to store the discs in a
drawer with other utensils.
NOTE
The large french fry disc must be placed
in the back slot in the storage container.
NOTE
The accessories storage container
can stand upright on its back to save
cupboard space. Make sure it is fully
snapped closed.
•
Store your Food Processor upright
on the kitchen bench or in an easily
accessible cupboard.
•
Do not place or store anything on top of
the food processor.
27/05/11 5:00 PM