ROBBE Power Peak Twin EQ-BID Notice D'utilisation page 41

4. CONTROlS
USB port
Graphic display
128 x 64 dot
matrix
"ESC" Taste
"MODE" -button
„CH" Taste
Select OUT
1/2
Temperature
Sensor
Output 1
Connection
for the BID-
chip/ key
Output 1
4.1 DESCRIPTION OF CONTROlS
• „INC"- AND „DEC"-BUTTONS
The "INC" and "DEC" buttons are used to navigate within a menu as well as increasing
(INC) and decreasing (DEC) a value setting.
1. INC
The arrow symbol will be scrolled line-by-line upwards until the required line is
highlighted. The settings of the charge as well as the discharge parameters are
increased by one step within the menu.
2. DEC
The arrow symbol will be scrolled line-by-line upwards until the required line is
highlighted. The settings of the charge as well as the discharge parameters are
deccreased by one step within the menu.
3. Holding one of the buttons down automatically increases the parameter value.
• „ENTER"-BUTTON
1. Operating the button within the line marked with an arrow,
selects one of the parameters.
2. Continuous pressing the button will start a charge-/ discharge-/ cycle
procedure.
Operating Instructions
Power Peak ® Twin EQ-BID
OUT 1
Equalizer port:
Output 1
OUT 2
Equalizer port:
Output 2
7
11-28 V DC
power supply
"INC" button
"DEC" button
"ENTER" button
Temperature
Sensor
Output 2
Connection for
the BID-chip/
key
Output 2