Publicité
Les langues disponibles
Les langues disponibles
SMART TOUCH
This appliance is equipped with Smart Touch technology that allows
you to interact, via the App, with smartphones based on Android
operating system and equipped with NFC (Near Field Communication)
function.
• Download on your smartphone the Candy simply-Fi App.
The Candy simply-Fi App is available for devices running
both Android and iOS, both for tablets and for
smartphones. However, you can interact with the
machine and take advantage of the potential offered
by Smart Touch only with Android smartphones
equipped with NFC technology, according to following
functional scheme:
Android smartphone with
NFC technology
Android smartphone
without NFC technology
Android Tablet
Apple iPhone
Apple iPad
FUNCTIONS
The main functions available using the App are:
• Fine Temperature Level Setting – To set temperature level also
by intermediate steps (0,5; 1; 1,5; 2; 2,5; 3; 3,5; 4; 4,5)
• Super Boost – To activate an additional boost to cool down quickly
both fridge and freezer.
• Eco Mode – Automatically the entire refrigerator is setted on
level 2 (+5°, -18°)
• My Statistics – Cooling statistics and tips for a more efficient use of
your machine.
• Smart Care – Direct link to User Manual and help on line.
Get all the details of the Smart Touch functions,
browsing the App in DEMO mode or go to:
www.candysmarttouch.com
HOW TO USE SMART TOUCH
FIRST TIME - Machine registration
• Enter the "Settings" menu of your Android smartphone and activate
the NFC function inside the "Wireless & Networks" menu.
Depending on the smartphone model and its Android
OS version, the process of the NFC activation may
be different. Refer to the smartphone manual for
more details.
• Turn on the Smart Touch button on the User Interface by pressing 2
seconds to enable the NFC antenna on the Sky Led. The Smart Touch
label switches on.
• Open the App, create the user profile and register the appliance
following the instructions on the phone display or the "Quick Guide"
attached on the machine.
DMore information, F.A.Q. and the
video for an easy registration are available on:
www.candysmarttouch.com/how-to
Interaction with the
machine + contents
Contents only
Contents only
Contents only
Contents only
NEXT TIME – Regular usage
• Every time you want to manage the machine through the App, first you
have to enable the Smart Touch mode by turning on the
Smart Touch button.
• Make sure you have unlocked your phone (from stand-by mode) and
you have activated the NFC function; then, follow the steps mentioned
earlier.
•If you want to activate a function (e.g. Smart Boost cycle),
select it in the App.
• Follow the instructions on the phone display, KEEPING IT ON the
Smart Touch logo on the Sky Led, when requested to do so by the App.
NOTES:
Place your smartphone so that the NFC antenna on its
back matches the position of the Smart Touch logo on
the appliance (as illustred below).
If you do not know the position of your NFC antenna,
slightly move the smartphone in a circular motion over
the Smart Touch logo until the App confirms the
connection. In order for the data transfer to be
successful, it is essential TO KEEP THE SMARTPHONE
ON THE DASHBOARD DURING THESE THE FEW
SECONDS OF THE PROCEDURE; a message on the
device will inform about the correct outcome of the
operation and advise you when it is possible to move
the smartphone away.
Thick cases or metallic stickers on your smartphone
could affect or prevent the transmission of data
between machine and telephone. If necessary,
remove them.
The replacement of some components of the
smartphone (e.g. back cover, battery, etc...) with
non-original ones, could result in the NFC antenna
removal, preventing the full use of the App.
The management and the control of the machine via
App is only possible "by proximity": it is therefore not
possible to perform remote operations (e.g.: from
another room; outside of the house).
EN 16
Publicité
