Publicité
•
All reminders and alerts are subject to limitations. The system may send you a reminder or an alert when no issue occurs, or may fail to send a reminder
or alert when an issue occurs. Nevertheless, please fully respond in a timely manner to any reminder or alert, but do not rely too much on them, as the
best protection is your own judgement, skills, and experience as a diver.
•
Violating a recommended decompression stop won't result in the device locking or other penalties. The device provides clear alerts for violating the
scheduled decompression plan, so that you can make decisions based on your training (including performing self-rescue, contacting your diving
insurance provider, or contacting a recompression chamber).
•
Safety stops are optional. Ignoring them won't cause the device to lock or other penalties, and there will be no alerts. However, it's recommended that
you perform safety stops as scheduled, to reduce the risk of DCS.
•
Apnoea training and testing are dangerous. Please make an appropriate training plan based on your own physical condition. Complete the training and
testing under the guidance of professional personnel. For safety reasons, do not train or test alone.
•
During scuba diving, ascending too fast will increase the risk of DCS. Therefore, please maintain a safe ascend rate at all times.
•
You should have received relevant training before using the compass feature for diving, so exercise caution when using it. Before diving, make sure that
the compass works properly, and be sure to calibrate it. Metal objects, permanent magnets, and motors may affect the accuracy of the compass.
•
When you've done using the device, clean or soak the device with clean water for a short while to prevent contaminants such as sea salt particles or
sediment from accumulating on the device, as this can cause button, pressure sensor, or speaker failure. If the speaker fails, you'll need to drain water
from the device after the preceding step, and air-dry the device for at least 24 hours, before checking whether the sound has returned to normal.
Disposal and recycling information
The crossed-out wheeled-bin symbol on your product, battery, literature or packaging reminds you that all electronic products and batteries must be taken
to separate waste collection points at the end of their working lives; they must not be disposed of in the normal waste stream with household garbage. It is
the responsibility of the user to dispose of the equipment using a designated collection point or service for separate recycling of waste electrical and
electronic equipment (WEEE) and batteries according to local laws.
Proper collection and recycling of your equipment helps ensure electrical and electronic equipment (EEE) waste is recycled in a manner that conserves
valuable materials and protects human health and the environment, improper handling, accidental breakage, damage, and/or improper recycling at the end
of its life may be harmful for health and environment. For more information about where and how to drop off your EEE waste, please contact your local
authorities, retailer or household waste disposal service or visit the website https://consumer.huawei.com/en/.
Reduction of hazardous substances
This device and its electrical accessories comply with local applicable rules on the restriction of the use of certain hazardous substances in electrical and
electronic equipment, such as EU REACH regulation, RoHS and Batteries (where included) directive. For declarations of conformity about REACH and
RoHS, please visit the website https://consumer.huawei.com/certification.
UK regulatory conformance
Hereby, Huawei Device Co., Ltd. declares that this device CLB-B19 is in compliance with the relevant statutory instruments in the UK. The full text of the
declaration of conformity is available at the following internet address: https://consumer.huawei.com/certification.
EU regulatory conformance
RF exposure requirements
As recommended by international guidelines, the device is designed not to exceed the limits established by the European Commission for exposure to
radio waves.
For the countries that adopt the SAR limit of 2.0 W/kg over 10 grams of tissue. The device complies with RF specifications when the device is worn on the
wrist and at a distance of 1.0 cm from your face.
Highest reported SAR value:
Head SAR: 0.11 W/kg.
Limbs SAR: 0.52 W/kg.
When charging the device, ensure it is 20 cm away from your body.
Statement
Hereby, Huawei Device Co., Ltd. declares that this device CLB-B19 is in compliance with the essential requirements and other relevant provisions of
Directive 2014/53/EU.
The most recent and valid version of the DoC (Declaration of Conformity) can be viewed at https://consumer.huawei.com/certification.
This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device may be restricted for use, depending on the local network.
Frequency bands and power
(a) Frequency bands in which the radio equipment operates: Some bands may not be available in all countries or all areas. Please contact the local
network provider for more details.
(b) Maximum radio-frequency power transmitted in the frequency bands in which the radio equipment operates: The maximum power for all bands is less
than the highest limit value specified in the related Harmonised Standard.
The frequency bands and transmitting power (radiated and/or conducted) nominal limits applicable to this radio equipment are as follows: Wi-Fi 2.4GHz: 20
dBm, Bluetooth 2.4GHz: 13 dBm, NFC 13.56MHz: 42 dBμA/m at 10m, Watch Wireless Charger:110-119KHz: 42dBμA/m at 10m, 119-135KHz: 66
descending 10 dB/dec above 119KHz at 10m, 135-140KHz: 42dBμA/m at 10m, 140-148KHz: 37.7dBμA/m at 10m, UWB 7737.6 MHz - 8236.8 MHz:
-1dBm/50MHz.
Accessories and Software Information
It is recommended that the following accessories should be used:
Charging cradle:KPG-W020
The product software version is 3.0.1.39(SP1C00M00).
Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released
by the manufacturer have been verified and are still compliant with the related rules.
All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.
For the most recent information about accessories and software, please see the DoC (Declaration of Conformity) at
https://consumer.huawei.com/certification.
Please visit https://consumer.huawei.com/en/support/hotline for recently updated hotline and email address in your country or region.
3
Publicité
