Troubleshooting; Technical Data; Disposal - Cleanmaxx XL-202 Mode D'emploi

2. Remove the exhaust air fi lter.
3. Tap out the exhaust air fi lter.
4. If necessary, also clean the exhaust air fi lter with clear, cold water.
5. Allow the exhaust air fi lter to dry completely before you insert it again.

Troubleshooting

If the device stops working properly, fi rst check whether you are able to correct the
problem yourself.
Do not attempt to repair a defective electrical device yourself!
Problem
The device does not
work.
Low suction force.
Dust escapes from the
device during cleaning.

Technical Data

Model number:
Article number:
Voltage supply:
Output:
Protection class:

Disposal

The packaging material is recyclable. Please dispose of it in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner. It should not be
disposed of in the normal domestic waste. Dispose of it at a recycling centre for
used electrical and electronic devices.
You can obtain more information from your local authorities.
25
Possible cause / solution
• Is the plug inserted in the mains socket correctly?
• Is the mains socket defective? Try another mains
socket.
• Check the fuse of your mains connection.
• Is the device switched on? Press the On / Off switch.
• Is the dust container full? Empty it.
• Are the fi lters heavily clogged? Clean it.
• Is the suction opening blocked? Switch off the device
and remove the blockage.
• Is the object that you want to suck up too large / too
heavy? Remove it by hand.
• Check whether the dust container and the fi lters are
correctly inserted. Correct their position if necessary.
XL-202
Z 01375
220–240 V~ 50 / 60 Hz
800 W
II
Customer Service /
Importer:
DS Produkte GmbH
Am Heisterbusch 1
19258 Gallin
Germany
Tel.: +49 38851 314650
(Calls subject to a charge. The
cost varies depending on the
service provider.)
All rights reserved.
EN