Agilent Technologies Turbo-V 81 PCB 24 Vdc Mode D'emploi page 177

Controller Connector and Jumper
The following figure shows the controller and indicates its
connectors and jumpers.
Pump
connector
Power Supply
Connector
(24V)
Signal
Connector
Figure 3
Turbo-V 81 PCB 24 Vdc Controller User Manual / 87-900-121-01 (D)
Serial Interface
Connector and Jumper
Technical Information
Controller Specifications
TR1
Jumper
177/208
17
Run-up time
setting
(8-60 min.)
factory
set to 8 min.