HQ Power HQPE10010 Mode D'emploi page 6

5. Overview
Refer to the illustrations on page 2 of this manual.
Device
1
2
3
4
Remote Control
1
2
3
4
5
6. Operation
1. Install and connect the device as described above.
2. Control the device from the remote controller.
3. Switch off and disconnect from the mains after use.
7. Cleaning and Maintenance
Before starting any cleaning or maintenance activities:
1. Unplug the device's power cord from the outlet.
2. Let the device cool down.
Cleaning
•
Use normal glass cleaner and a soft cloth to wipe off the outside casing.
•
Always be sure to dry all parts completely before plugging the device back in.
•
Cleaning frequency depends on the environment in which the unit operates (i.e.
smoke, fog residue, dust, dew).
•
Do not immerse the device in any liquid.
Maintenance
•
All screws should be tightened and free of corrosion.
•
The housing, the lenses, the mounting supports and the installation location (e.g.
ceiling, suspension, trussing) should not be deformed, modified or tampered with;
e.g. do not drill extra holes in mounting supports, do not change the location of the
connections...
•
Mechanically moving parts must not show any signs of wear and tear.
•
The electric power supply cables must not show any damage. Have a qualified
technician maintain the device.
•
There are no user-serviceable parts, apart from the fuse and the lamp.
•
Refer to an authorized dealer for service and/or spare parts.
V. 02 – 10/07/2018
fan
mode/speed
microphone
power input
laser on-off
laser auto mode
laser sound mode
LED on-off
laser strobe
HQPE10010
5
6
7
6
7
8
9
10
6
off
auto mode
sound mode
RG/R/G laser
motor stop
motor speed
LED auto mode
LED strobe
©Velleman nv