Suntec Wellness KLIMATRONIC 11580 HEAT SUPREME Mode D'emploi page 14

than your target temperature, the heating switches on. If the room
temperature is higher than the target temperature, the heater turns off.
Heating continues as soon as the room temperature is at least 3°C lower
than the target temperature.
• Program mode:
The unit activates the saved week program.
• Auto mode:
In auto mode, the saved week program is activated in the same way as in
program mode. In addition, the switch-on time is automatically adjusted to
the difference between the room temperature and the target temperature in
order to reach the target temperature more quickly at the set time:
If the room temperature is 5°C lower than the target temperature, the unit
switches on 30 minutes before the programmed switch-on time.
If the room temperature from 6°C is lower than the target temperature, the
unit switches on 60 min. before the programmed switch-on time.
Anti Frost Function
It will keep the room temperature above "Freezing Point". Please set the temperature to 5°C in manual mode. This
prevents pipe breakage due to ice.
User Advice:
• If you will be away for several hours, consider reducing the temperature setting.
• If you have several appliances in one room, d o n o t let them operate simultaneously. Therefor
you will obtain a more homogeneous temperature without increasing your electricity
consumption.
• When you are airing a room, switch off the appliance.
Cleaning
1.
Before cleaning, turn off the heater, unplug the power cord and allow the heater to cool down.
2.
Do not immerse power cord and plug or heater in water or other liquid. Do not pour water or other liquid
over the heater.
3.
Use a vacuum cleaner to remove dust and lint on the metal grid of the heater.
4.
Wipe the heater with a dry cloth to remove dust and a damp cloth (not wet) to clean off strains.
5.
Do not use detergents, abrasive cleaning powder or polish of any kind on the body of
the heater, as these can damage the finish.
Storage
Store the heater in a cool dry place. To prevent dust and dirt getting in the heater, use the old packaging to repack
the unit.
If the heater is not used regularly or if it is store uncovered, the heater may produce small amounts of smoke
and/or smell upon first use. This is normal; it is due to the accumulation of humidity and dust on the heating
element.
Repairing
Heater not warm
1.
Check if the heater is turned on or not?
2.
Check the Thermostat Control Knob is on maximum position or not?
3.
Check if any objects are covering the unit or not?
Heater not operating
1.
Check if the power cord is plugged into an electrical outlet or not?
2.
Check if the electrical supply in the house or the main fuse is working or not?
3.
Make sure the power switch is on.
4.
Check if the Thermostat Control Knob is on maximum position. (Ensure the light indicator is on)
If after following the above checks the heater is still not operating please contact the manufacturers' service
agent. All repairs must be referred to authorized personnel from authorized retailer.
Important: Any tampering with the appliance will invalidate the warranty. Repairs carried out improperly and by
unqualified persons may have serious consequences for the user.