CONTROLS AND FEATURES
Winch - ( 8 )
This vehicle is equipped with a 3500-lb winch. A wireless remote
control and standard wired winch controller are located in the glove
compartment� The wired winch controller power port is also located
in the glove compartment. To preserve battery power, only operate
the winch while the engine is running. Please refer to the winch
operation section of this manual for further information or consult
with your dealer on the use of the winch before using your vehicle.
Rear Access Cover - ( 9 )
Removal: Grasp the cover edge, pull upward to release the
grommet pins, and remove.
Install: Insert the cover tabs into the corresponding holes on the
body, then align the grommet pins and press down.
NOTE:
Maintain the access cover by applying thin lubricant to the grommet
pins occasionally�
Remove the rear access cover, then the parts around rear part of
engine can be inspected and repaired.
53