Inspect The Engine Oil Level
1� Place the vehicle on the level ground and park the vehicle�
2� Start the engine and idle for 30 seconds, then stop the engine.
3� Wait for a few minutes to allow the engine oil to settle down
inside the engine�
Transmission Oil Level
4� Remove the transmission oil dipstick ( 2 ) and clean it.
5� Insert the dipstick back into the dipstick hole, make the dipstick
threads contact the hole surface without screwing it.
6� Remove the oil dipstick and check if the oil level is between
upper and lower mark�
7� Reinstall the oil dipstick and tighten it�
Crank Case Oil Level
8� Remove the crank case oil dipstick ( 1 ) and clean it.
9� Insert the dipstick back into the dipstick hole, make the dipstick
threads contact the hole surface without screwing it.
10� Remove the oil dipstick and check if the oil level is between
upper and lower mark�
11� Reinstall the oil dipstick and tighten it�
MAINTENANCE PROCEDURES
137
2
1
MAX
MIN