Publicité
Les langues disponibles
Les langues disponibles
If the gap is not acceptable:
•
Loosen all the bolts.
•
Check the tire position on wheel, reposition it if necessary.
•
Restart the pretightening following the indicated
sequence.
•
Finally torque the beadlock ring bolts to the first and
second torque values following the indicated sequence.
Beadlock ring bolts (Final torque): 221 in-lb (25N·m ± 1N·m)
Tighten the beadlock ring bolts in a clockwise direction as
shown�
Make sure the tire remains centered in place before inflating
with air�
Inflate the tire to seat the inner beads on the wheel.
Do not exceed the recommended maximum tire pressure
when seating beads.
MAINTENANCE PROCEDURES
CAUTION
174
2
1
3
16
15
14
13
12
11
10
9
4
5
6
7
8
Publicité
