Télécharger Imprimer la page

TEFAL EASY PRESSING GV5246 Mode D'emploi page 11

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
1800115362 GV52XX TEFAL:110x154
PROBLEMS
White streaks come
through the holes
in the soleplate.
Brown streaks
come through the
holes in the
soleplate and stain
the linen.
The soleplate is
dirty or brown and
may stain the
linen.
There is no steam
or there is little
steam.
Steam escapes
from the rinse
plug.
Steam or water
escapes under the
appliance.
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a civic waste disposal centre.
If you have any problems or queries please call our Customer Relations team first for expert help and advice:
CAUSES
Your boiler has a build-up of scale
because it has not been rinsed
out regularly.
You are using chemical descaling
agents or additives in the water
for ironing.
You are ironing at too high a
temperature.
Your linen is not rinsed sufficiently
or you have ironed a new garment
before washing it.
You are using starch.
The water tank is empty (red light
on).
The soleplate temperature is set to
the maximum.
The rinse plug has not been
tightened correctly.
The rinse plug seal is damaged.
The generator is faulty.
The generator is faulty.
0845 602 1454 - UK / (01) 677 4003 - Ireland
or consult our website - www.tefal.co.uk
16/06/09
15:16
SOLUTIONS
Rinse out the boiler.
Never add this type of product in the
water tank or in the boiler (see § "for
what water may be used"). Contact
an Approved Service Centre.
See our recommendations regarding
temperature control setting.
Ensure linen is rinsed thoroughly to
remove any soap deposits or
chemicals on new garments which
may be sucked up by the iron.
Always spray starch on the reverse
side of the fabric to be ironed.
Fill the tank and press the "Restart"
button until the indicator goes out.
The generator is working but steam
is very hot and dry As a
consequence, it is less visible.
Tighten the rinse plug correctly.
Contact an Approved Service Centre
to order a new rinse plug seal.
Stop using the generator and
contact an ApprovedService Centre.
Stop using the generator and
contact an Approved Service Centre.
Page 8
GB
D
F
NL
E
P
I
DK
N
S
FIN
TR
GR
PL
CZ
SK
H
SLO
RU
UA
HR
RO
ET
LT
LV
8

Publicité

loading

Ce manuel est également adapté pour:

Easy pressing gv52 serie