Grounded
wall outlet
Plug
Settings*
Plug the power cable firmly and completely into the recessed power cord
socket located at the bottom of the unit and plug the other end into a
grounded wall outlet or power strip. Turn on your Blueair unit. The blue
light-emitting diode indicates that the unit is working. Set the control knob
to maximum speed, which is recommended for fast initial cleaning, daytime
use, or very polluted air. After a few minutes, adjust the control to the desired
speed. Minimum speed is generally recommended for nighttime use.
* For Blueair E Series units (270E, 450E, 550E, 650E), please refer to the separate sheet included
with your unit for instructions on settings.
4
Blueair
500/600 Series
Recessed power
cord socket
Power cable connector
English