Publicité
Les langues disponibles
Les langues disponibles
16
Important!
–
For your own safety you must only use the acces-
sories and additional units listed in the operating
instructions or recommended or specified by the
manufacturer. The use of mounted tools or ac-
cessories other than those recommended in the
operating instructions or catalogue may place
your personal safety at risk.
17
Noise
Wear ear muffs when you use the compressor.
–
Replacing the power cable
18
–
To prevent hazards, leave the replacement of
damaged power cables strictly to the manufac-
turer or a qualified electrician. There is a risk of
electric shock!
19
Inflating tires
Directly after inflating tires, check the pressure
–
with a suitable pressure gauge, for example at
your filling station.
20
Roadworthy compressors for building site operations
–
Make sure that all lines and fittings are suitable for
the maximum permissible operating pressure of
the compressor.
Place of installation
21
–
Set up the compressor on an even surface.
22
Supply hoses at pressures above 7 bar should be
equipped with a safety cable (e.g. a wire rope).
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed air
and blasting guns
•
The compressor pump and lines can become very hot
during operation. Touching these parts will burn you.
•
The air which is sucked in by the compressor must be
kept free of impurities that could cause fires or explo-
sions in the compressor pump.
When releasing the hose coupling, hold the hose cou-
•
pling piece with your hand. This way, you can protect
yourself against injury from the rebounding hose.
•
Wear safety goggles when working with the blow- out
pistol. Foreign bodies or blown off parts can easily
cause injuries.
Do not blow at people with the blow- out pistol and do
•
not clean clothes while being worn. Risk of injury!
Safety information for paint spraying
•
Do not process any paints or solvents with a flash point
below 55° C. There is a risk of explosion!
Do not heat up paints or solvents. There is a risk of ex-
•
plosion!
•
If hazardous liquids are processed, wear protective fil-
ter units (face guards). Also, adhere to the safety infor-
mation provided by the manufacturers of such liquids.
•
The details and designations of the Ordinance on Haz-
ardous Substances, which are displayed on the outer
packaging of the processed material, must be ob-
served.
•
Additional protective measures are to be undertaken if
necessary, particularly the wearing of suitable clothing
and masks.
•
Do not smoke during the spraying process and/or in the
work area. There is a risk of explosion! Paint vapors are
easily combustible.
Never set up or operate the equipment in the vicinity of
•
a fire place, open lights or sparking machines.
•
Do not store or eat food and drink in the work area.
Paint vapors are harmful to your health.
•
The work area must exceed 30 m
tilation must be ensured during spraying and drying.
Do not spray against the wind. Always adhere to the
regulations of the local police authority when spraying
combustible or hazardous materials.
•
Do not process media such as white spirit, butyl alcohol
and methylene chloride with the PVC pressure hose.
These media will destroy the pressure hose.
Operating pressure vessels
You must keep your pressure vessel in good working
•
order, operate the vessel correctly, monitor the vessel,
carry out necessary maintenance and repair work im-
mediately and meet the relevant safety precautions.
•
The supervisory authority may enforce essential control
measures in individual cases.
A pressure vessel is not allowed to be used if it has
•
faults or deficiencies that can endanger workers or third
parties.
•
Check the pressure vessel for signs of rust and dam-
age each time before using. Do not use the compressor
with a damaged or rusty pressure vessel. If you discover
any damage, then please contact the customer service
workshop.
Do not lose these safety instructions
Residual risk
Observe the specified maintenance and safety instructions
in the instruction manual.
Always be attentive at work and keep third persons at a safe
distance from your workplace.
Even with proper use of the device, a certain residual risk
remains, which can not be excluded. The following poten-
tial hazards can be derived from the type and design of
the device:
unintentional commissioning of the product.
Hearing loss if no suitable hearing protection is worn.
Wear safety glasses to prevent your eyes and face from
dust and dirt particles.
Inhalation of whirled- up dust and dirt particles.
and sufficient ven-
3
GB/IE
19
Publicité
