Husqvarna DE 130 H Manuel D'utilisation page 14

7. Close the bottom of the Longopac with a cable tie.
To discard a full Longopac bag and
prepare a new Longopac bag
WARNING:
caution, a full Longopac bag can be heavy.
Make sure that the cable ties are closed
correctly before you lift the Longopac bag.
1. Pull out the Longopac bag (A) and attach a cable tie
(B) to close the new Longopac bag.
B
14
Lift the Longopac bag with
A
2. Shake down the dust in the used Longopac bag.
3. Attach a cable tie 10 cm/3.9 in. below the first cable
tie to close the used Longopac bag. Cut off the
Longopac bag between the cable ties.
4. If the remaining part of the Longopac bag cassette
is too small to prepare a new Longopac bag, install
a new Longopac bag cassette. Refer to
new Longopac bag cassette on page 13 .
5. Obey local regulations for disposal of the full
Longopac bag.
To do after completed work
1. If you stopped auto pulse function during the work
day, manually clean the filters. Refer to
purge procedure on page 12 .
2. Stop the product, refer to
product on page 11 .
3. Discard the Longopac bag. Refer to
Longopac bag and prepare a new Longopac bag on
page 14 .
4. Clean the product. Refer to
page 16 .
5. Prepare the product for transportation. Refer to
move the product on page 21 .
To install a
To do a filter
To start and stop the
To discard a full
To clean the product on
To
2002 - 003 - 30.06.2023