Publicité
Les langues disponibles
Les langues disponibles
®
4. Bluetooth
connection. Refer to
connectivity with fleet on page 11 .
5. Diameter change function for hose, refer to
the hose nozzle diameter on page 11
6. e-Flow button, refer to
7. ON/OFF button
To use embedded connectivity with
fleet
Note:
This part is applicable only for products
supplied with embedded connectivity.
Note:
Radio transmission by the Bluetooth
will be enabled on the first time of connection to a power
outlet, and stay on after that.
1. Download the Husqvarna Fleet Services iOS or
Android app Husqvarna Fleet Services
2. Go to Husqvarna Fleet Services website https://
fleetservices.husqvarna.com for more information.
e-Flow function
The product has an e-Flow function. This function
automatically adjusts the airflow to the workload for
optimal performance. The product always starts with the
last settings used.
Functions of the control panel on page 10 to
Refer to
engage or disengage the function.
Airflow warning system
The airflow in the suction hose must be more than 20
m/s (66 ft/s).
For the minimum airflow with the selected hose diameter
refer to the table.
Airflow alarm levels
mm
inch
5
21
/
6
27
1
32
1¼
38
1 ½
42
1 ⅔
51
2
63
2 ½
76
3
2002 - 003 - 30.06.2023
To use embedded
To select
e-Flow function on page 11
®
function
™
.
3
m
/h
CFM
25
15
41
24
58
34
82
48
100
59
147
87
224
132
327
192
Note:
If the airflow is less than 20 m/s (66 ft/s), the
sound alarm and the warning symbol comes on. Refer to
Warnings on the control panel on page 20 .
To select the hose nozzle diameter
Note:
If you do not select the correct hose diameter,
the airflow warning system will come on.
When you start the product, the last selected hose
diameter is automatically selected.
•
Push the button to select the correct hose diameter.
The green LED tells which diameter you have
selected.
38 1
42 1
51 2
63 2
76 3
To start and stop the product
Note:
Wait for 5 seconds after you start the product
to operate with full suction. The suction is not at full
capacity directly at start.
1. Make sure that the frequency and voltage shown on
the rating plate agree with the power supply.
2. Connect the product to an applicable power socket.
3. Push the "I" on the main switch to activate the
Product overview on page 3 .
product. Refer to
1/2
2/3
1/2
11
Publicité
