Husqvarna DE 130 H Manuel D'utilisation page 18

CAUTION:
surface of the HEPA filter. This can cause
damage to the HEPA filter.
1. Remove the 6 screws and the HEPA filter cover.
2. Attach the dust cap (A) and pull out the HEPA filter.
Put it into a clean plastic bag (C).
A
B
18
Do not touch the inner
C
3. Discard the plastic bag correctly. Refer to local
regulations.
4. Install a new HEPA filter. Make sure that the HEPA
filter is pushed to the end position.
5. Repeat step 2–4 on the other HEPA filter.
6. Install the HEPA filter cover and the 6 screws.
2002 - 003 - 30.06.2023