VINCENT SV-238MK Manuel D'utilisation page 27

1. Infrared receiver for the remote control
2. Display
In normal use the display shows the name of the
selected input and the volume setting. As long as
adjustments are being made (e.g. to MUTE, BALAN-
CE, GAIN), the relevant values are presented.
3. "LINE1"..."LINE5" and "BALANCED":
Input selection
With a touch on one of these buttons you choose
for playback one of the audio sources attached to
the corresponding connectors at the amplifier's
backside (8)(10).
FRONT VIEW
1
3 4
2
5
4. POWER
This is the main power switch for turning on and
off the device.
5. VOLUME / : Volume keys
These are the keys for the adjustment of the main
volume level of the system. They consequently con-
trol the volume of the loudspeakers and the signal
of the preamplifier outputs "PRE OUTPUT" (9).
Vincent
27