Hansgrohe Axor Montreux 16570 1 Série Instructions De Montage / Mode D'emploi / Garantie page 22

1
2
¼"
3

English
Carlton / Phoenix / Terrano only
Position the handshower holder against the wall 8"
from the center of the valve.
Use the handshower holder as a template. Mark the
positions of the screw holes.
Drill the holes with a ¼" bit.
Install the anchors.
Seal the wall around the anchor
with waterproof sealant.
Failure to seal the wall can lead
to possible water damage.
Install the handshower holder with the screws.