Hansgrohe Axor Montreux 16570 1 Série Instructions De Montage / Mode D'emploi / Garantie page 10

2
3


4
10
1
English
Use the spacer tool to check the connections for
proper distance.
Confirm that the connections are level.
The front of the connection should be between ⅞"
and 1" from the surface of the finished wall.
Remove the alignment pins from the covers.
Screw them into the connection flanges.
Seal the wall around the ball-s
connections with waterproof
sealant.
Failure to seal the wall can lead
to possible water damage.
Install the escutcheons on the valve.