Olimpia splendid Unico Art 12 SF Mode D'emploi Et D'entretien page 53

0.3 - GENERAL WARNINGS
BASIC SAFETY PRECAUTIONS MUST ALWAYS BE FOLLOWED IN
ORDER TO REDUCE RISKS OF FIRE, ELECTRIC SHOCKS
AND INJURY, INCLUDING THE FOLLOWING:
1. This document is restricted in use to the terms of the law and may not be
copied or transferred to third parties without the express authorization of
the manufacturer, OLIMPIA SPLENDID.
Our machines are subject to change and some parts may appear different
from the ones shown here, without this affecting the text of the manual in
any way.
2. Read this manual carefully before performing any operation (installation,
maintenance, use) and follow the instructions contained in each chapter.
3. Make all personnel involved in transport and installation of the machine
aware of these instructions.
4. The manufacturer is not responsible for damages to persons or property
caused by failure to follow the instructions in this manual.
5. The manufacturer reserves the right to make any changes it deems
advisable to its models, although the essential features described in this
manual remain the same.
6. The installation and maintenance of air-conditioners like this one may be
hazardous as they contain a cooling gas under pressure as well as powered
parts.
Therefore, the installation, first startup and subsequent maintenance
should be carried out exclusively by authorized, qualified personnel.
7. Failing to comply with the instructions contained in this manual, and using
the unit with temperatures exceeding the permissible temperature range
will invalidate the warranty.
8. Routine maintenance of the filters and general external cleaning can be
done by the user as these operations are not difficult or dangerous.
9. During installation and maintenance, respect the precautions indicated in
the manual, and on the labels applied inside the units, as well as all the
precautions suggested by good sense and by the safety regulations in
effect in your country.
WHEN USING ELECTRICAL EQUIPMENT,
EN - 5
UNICO
ART R410A