Télécharger Imprimer la page

Philips CoreLine Batten BN126C LED64S/840 WIA L1200 Mode D'emploi page 2

Publicité

-The luminaire shall be installed by a qualified electrican and wired in
accordance with the latest IEE electrical regulations or the national
requirements.
- The light source of this luminaire is not replaceable; when the light
source reaches its end of life the whole luminaire shall be replaced.
- Luminaire must not be used or stored in corrosive environment
where hazardous materials such as sulphur,chlorine, phthalates,etc,are present.
- This luminaire is not suitable for use as emergency lighting.
- Water entering into IP20 luminaire is strictly prohibited. IP20
luminaire is not protected against wet condition, water ingress may
cause electrical failure or unsafe conditions.
- Luminaire is rated at IP40 from the front (part 1) and IP20 for a complete housing (part 2).
1: Luminaire opening
1
2
2.2:Suspend Mounted
2x
2x
Part 1
Part 2
Plug all BESA holes
in the housing
3x
2x
2x
or
2.1:Surface Mounted
2.3:Mounted on a BESA
2/12
BESA:3x L1200/ L1500

Publicité

loading

Ce manuel est également adapté pour:

Coreline batten bn126c serieCoreline batten bn126c led80s/840 wia l1500Coreline batten bn126c led74s/830 wia l1500Coreline batten bn126c led41s/840 wia l1200Coreline batten bn126c led52s/840 wia l1500Coreline batten bn126c led60s/830 wia l1200 ... Afficher tout