Aqua Medic easy line 90/150 Mode D'emploi page 9

Art.-No. Pict.-No.
U605.06 2
U605.01 3
U605.50 4, 7 u. 9
U700.25-32 5 / 7
U605.60 8
U605.65 8
U700.25-4 9
U700.25-31 10
U610.06 11
U610.01 11
2. Set-Up
To fix the unit to a wall, disconnect the two wall brackets from the module and fix them directly on
the wall or a mounting plate - preferably near a tap connection. Press module into the brackets -
ready.
Then, mount the membrane and connect the tubes. To avoid any failures, follow the instructions
carefully:
The connections of the unit are (please refer to Fig. 1):
Note: Before taking the unit into first operation, rinse the pre-filter and then attach it to
the reverse osmosis module!
9
Article
Sediment filter 5 µm with fittings for easy line
Carbonate prefilter with fittings for easy line
Membrane housing
Fitting 1/8" 90° white
Membrane 90 l/day
Membrane 150 l/day
O-ring 55 x 4
Fitting 1/4" white
Flushing valve 90 l/day
Flushing valve 150 l/day
Tube fittings:
1. Take the blue lock ring off.
2. Put the hose to a complete stop into the fitting.
3. Refit the lock ring.
4. Pull the hose back as a test that it was placed firmly.
Release the plug connection:
1. Take the blue lock ring off.
2. Squeeze the ring at the fitting. Now, you can pull the tube out.
3. Please don't forget to refit the lock ring.