Cleaning And Care Of The Device; Storage; Disposal; What If There Are Problems - Beurer TL 30 Mode D'emploi

7. Cleaning and care of the device

The device should be cleaned occasionally.
Important
• Ensure that no water penetrates inside the device!
Before you clean the device, always switch it off, unplug it and let it cool off.
• Do not wash the device in a washing machine!
Use a slightly damp cloth to clean the device.
• Do not touch the device with wet hands while it is plugged in; do not allow any water to be sprayed onto
the device. The device must be operated only when it is completely dry.
Do not use abrasive detergents and never immerse the device in water.

8. Storage

If you are not going to use the device for an extended period of time, disconnect it and store it in a dry place, out
of the reach of children.
Follow the storage instructions provided in the "Technical data" chapter.

9. Disposal

For environmental reasons, do not dispose of the device in the household waste at the end of its useful
life. Dispose of the device at a suitable local collection or recycling point. Dispose of the device in accord-
ance with EC Directive – WEEE (Waste Electrical and Electronic Equipment). If you have any questions,
please contact the local authorities responsible for waste disposal.

10. What if there are problems?

Problem Possible cause
Device does not On/off button switched off
light up
No electricity
No electricity
LEDs have reached the end of their service life.
LEDs faulty.

11. Technical specifications

Model no.
Type
Dimensions (WHD)
Weight
Lighting elements
Power
Light intensity
Radiation
Operating conditions
Storage conditions
Product classification
TL 30
WL 11
156 x 236 x 20 mm (26 mm incl. storage slot)
332 g (430 g incl. mains adapter + storage pouch)
LED
5 watts
10,000 lux (Distance: approx. 10 cm)
Output of radiation beyond the visible spectrum (infrared and UV) is
so low that it is harmless to eyes and skin.
0°C to +35°C, 15 - 90% relative humidity
-20°C to +50°C, 15 - 90% relative humidity
External power supply, Protection class II, IP21
12
Solution
Switch on the on/off button.
Connect the mains part properly.
The mains part is faulty. Contact cus-
tomer services or your retailer.
If you need to have the device repaired,
contact customer service or an author-
ised dealer.