Description Of The Device And Accessories; Operating The Steam Vaporiser - Beurer SI 40 Mode D'emploi

4. Description of the device and
accessories
Overview of the steam vaporiser
1
11
10
9
8
1 Mask
2 Variable steam
regulator
3 Cover
4 Lid
5 Water heater tank
6 ON/OFF switch
2
3
4
5
6
7
7 Mains connector
cable
8 Wastewater tank
9 Aroma tank
10 Suction tube
11 Nozzle

5. Operating the steam vaporiser

Note
Follow the instructions in the Chapter "Cleaning and
disinfection" before using the device for the first time or
if it has not been used for an extended period.
1. Remove the device from the packaging. Ensure
that there is a mains socket close to the set-up
area.
2. Place the device on a firm,
even surface and pull the
cover off by pressing the
button above the aroma
tank/wastewater tank.
3. Remove the sticker with
the warning notice from the
cover.
Twist the lid anti-clockwise.
Observe the marking on the
lid when you do this. Re-
move the lid.
4. Fill the water heater tank wi-
th approx. 25 ml of water (do
not fill the water heater tank
above the "MAX" marking).
Always use water to fill the
water heater tank and never
use any other liquids.
5. Refit the lid and close it tightly by turning it clockwise.
Observe the marking on the lid when you do this.
6. Replace the cover from above.
13