Oki IP-7700-26 Guide De Référence Rapide page 3

Appearance / Name and function of each part
This section shows the printer appearance and describes the name and function of each component.
Printer front (takeup side)
9
@
$
Operation panel
1
Sensor lever
2
Tension bar guide
3
Caster
4
Pressure control knob
5
Front cover
6
Waste ink bottle unit
7
Cap cover
8
Wipe cover
9
Take-up direction switch
0
Media feed switch
!
Take-up reel switch
Media dryer fan
@
Protection bar
#
Bulk ink system
$
2
#
2
3
Lock
(ON)
Unlock
(OFF)
4
Provided with LEDS and LCD to display printer status and keys to set functions.
Used as a replacement for the ink box cover. Manipulate the lever when prompted to open or
close the ink cover during guidance.
The guide of bar to apply tension to the media
Unlocked to move the printer and locked to immobilize it.
A knob to switch the media press force
Must be closed during printing.
A unit to contain a waste ink bottle
Opened when cleaning the capping unit or replacing the wiper blade.
Opened when maintaining the print head (replacement/height adjustment).
A switch to select media takeup direction
A switch to feed media automatically
A switch to wind media automatically
A fan to dry ink after printing.
A bar to protect media surface just after the print.
A unit to set a bulk ink
6
3
1
8
5
7
0
!