Eurosystems TR 80 Manuel D'utilisation Et D'entretien page 44

Issue
Clear fall in
engine rpm
during cutting
operations
Flail mower is
improperly raising
during the cutting
operation.
AD - Authorized Eurosystems Dealer;
U - User
EN-16
Possible Causes
The grass id very
hight and thick
and/or presence
of shrubs and/or
undue feed rate.
The grass id very
high and thick
and/or presence
of shrubs and/or
undue feed rate.
Solution
Slow down or stop
the feed rate in order
to allow the engine to
recover the rpm
Slow down or stop the
feed rate to allow the
correct cutting position
( i.e. Flail mower to be
on the ground).
Who Reference
U
U