Publicité
Les langues disponibles
Les langues disponibles
8. FAULTS
Issue
The blades do not
move
Flail mower
vibrates
The grass is not
completely cut
Flail mower
oscillation is
blocked
The adjustment of
the cutting height
is difficult because
of the hardening of
the handle
Possible Causes
Any belt break
The belt is out from
the pulley seat
The belt is out of
the seat of the belt
stretchers
Blades deformed or
worn-out
Blade shaft
is crooked or
damaged.
Blades are very
worn-out and/or
damaged
Lack of grease into
the oscillation pin
Lack of grease into
the screw
Solution
Change the belt
Assembly the belt
correctly or change
it if it is damaged/
worn-out
Assemble the belt
correctly or change it
if it is damaged /worn
out
If deformed or worn-
out, please change the
blades
If the blade shaft is
crooked or damaged ,
please straighten it out
or change it
Change the blades
Grease the oscillation
pin
Grease the bushings
for the height
adjustment
Who
Reference
AD
AD
AD
AD
AD
AD
Please see
chapt. 6.4
U
GREASE
[ fig. 11 ]
Please see
chapt. 6.4
U
GREASE
[ fig. 11 ]
EN-15
Publicité
