Publicité
Les langues disponibles
Les langues disponibles
Mounting the unit in the
dashboard
• Before installing, make sure the catches on
both sides of the mounting sleeve are
bent inwards 2 mm (
• For Japanese cars, see "Mounting the unit
in a Japanese car" (page 18).
CAUTION
Do not touch the left side of the unit when
removing from the dashboard. The
heatsink on the left side of the unit
remains hot right after use.
1
Position the mounting sleeve
inside the dashboard, then bend the
claws outward for a tight fit.
53 mm (2
2
Mount the unit onto the mounting
sleeve , then attach the trim ring
.
Notes
• If the catches are straight or bent outwards, the
unit will not be installed securely and may spring
out.
• Make sure the 4 catches on the trim ring are
properly engaged in the slots of the unit.
18
GB
3
/
in).
32
1
182 mm (7
/
in)
4
1
/
in)
8
Catch
Mounting the unit in a Japanese car
You may not be able to install this unit in
some makes of Japanese cars. In such a
case, consult your Sony dealer.
TOYOTA
to dashboard/center console
Bracket
Existing parts supplied
with your car
NISSAN
to dashboard/center console
Bracket
Existing parts supplied
with your car
Note
To prevent malfunction, install only with the
mounting screws .
Bracket
Bracket
Publicité
