Publicité
A
|
Specifications
AUDIO POWER SPECIFICATIONS
standards.
*(XM-430)
Other Specifications
Circuit system
OTL (output transformerless)
circuit
pulse power supply
Inputs
RCA pin jacks
Outputs
Speaker terminals
Speaker impedance
2 -8 ohms (stereo)
4-8 ohms (when used as a
bridging amplifier)
Maximum output
100 (60)* W per channel with
4-speaker system (at 4 ohms)
100 W x 2 + 260 W x 1 (60 W x2
+150 W x 1)* with 3-speaker
system
260 (150)* W per channel with
2-speaker system (at 4 ohms)
Rated outputs (supply voltage at 14.4 V)
50 (30)* W per channel with
4-speaker system (20 Hz — 20
kHz, 0.04 % THD, at 4 ohms)
65 (40 )* W per channel with
4-speaker system (20 Hz - 20
kHz, 0.1 % THD, at 2 ohms)
130 (70)* W per channel with
2-speaker system (20 Hz — 20
kHz, 0.1 % THD, at.4 ohms)
Frequency response
5 Hz - 100 kHz (+? dB)
Harmonic distortion
0.005 % or less
(at 1kHz, 4 ohms)
Input level adjustment range
0.2-2V
High-pass filter (INPUT A, B, C and D)
80 Hz, -12 dB/oct
Low-pass filter for subwoofer {INPUT A, B, C and D)
80 Hz, -18 dB/oct
Power requirements
12 V DC car battery
(negative ground)
Power supply voltage
10.5-16V
at rated output: 26 (18)* A
Remote input: 5 mA
Approx. 219 x 56 x 310 (260)*
mm (w/h/d)
(85/8 x 2!/4x 12/4 (10 1/4)* in.)
not incl. projecting parts and
controls
Mass
Approx. 3 kg (6 lb. 9 oz.) (2.5 kg
(5 lb. 8 oz))* not incl. accessories
Supplied accessories
Mounting screws (x 4)
Optional accessories
Connecting cord for power
amplifier RC-46
RCA pin cord RC-64 (2 m)
RCA pin cord RC-65 (5 m)
Current drain
Dimensions
*(XM-430)
Design and specifications are subject to change
without notice.
Publicité
