Sony XM-D6000GTX Instructions De Service

SERVICE MANUAL
Ver. 1.0 2004. 12
AUDIO POWER SPECIFICATIONS (US MODEL)
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
300 watts minimum continuous average power into 4 ohms,
20 Hz to 200 Hz with no more than 1.0% total harmonic
distortion per Car Audio Ad Hoc Committee standards.
Other Specifications
Circuit system Class D Technology
Pulse power supply
Inputs RCA pin jacks
High level input connector
Outputs Speaker terminals
Through out pin jacks
Suitable speaker impedance
2 – 8 Ω
Maximum outputs 800 W (at 4 Ω)
1,400 W (at 2 Ω)
Rated outputs (supply voltage at 14.4 V)
300 W RMS (20 – 200 Hz, 1.0% THD+N, at 4 Ω)
600 W RMS (20 – 200 Hz, 1.0% THD+N, at 2 Ω)
SN Ratio 76 dBA (Reference 1 W into 4 Ω)
+0.5
Frequency response 5 – 300 Hz (
–3
0.04% or less (at 100 Hz, 4 Ω)
Harmonic distortion
Input level adjustment range
0.3 – 6.0 V (RCA pin jacks)
6.5 – 16.0 V (High level input)
Sony Corporation
9-879-370-01
2004L04-1 e Vehicle Company
© 2004. 12 Published by Sony Engineering Corporation
XM-D6000GTX
SPECIFICATIONS
dB)
Sub-sonic filter 15 Hz, –12 dB/oct
Low-pass filter 50 – 300 Hz, –12 dB/oct
Low boost 0 – 10 dB (40 Hz)
Power requirements 12 V DC car battery
(negative ground)
Power supply voltage 10.5 – 16 V
at rated output: 75 A (at 2 Ω)
Current drain
Remote input: 2 mA
Approx. 400 × 55 × 276 mm
Dimensions
(15 × 2
3/4 1/4
projecting parts and controls
Mass Approx. 4.6 kg (10 lb. 3 oz.) not incl. accessories
Supplied accessories Mounting screws (4)
High level input cord (1)
Protection cap (1)
Design and specifications are subject to change without
notice.
MONAURAL POWER AMPLIFIER
US Model
Canadian Model
E Model
× 10 in.) (w/h/d) not incl.
7/8
1