Description
1. Ignition switch Device for allowing the engine to be start-
ed and stopped.
2. Throttle trigger lockout Device that prevents the acci-
dental operation of the throttle trigger until manually re-
leased.
3. Spark plug
4. Air cleaner cover Covers air filter.
5. Fuel tank cap For closing the fuel tank.
6. Fuel tank Contains fuel and fuel filter.
7. Fuel tank guard
8. Throttle trigger Device activated by the operator's finger,
for controlling the engine speed.
9. Front grip
10. Hand guard Guard between the front handle and cutting
device for protecting the hand from injuries if the hand
slips off the handle.
11. Outer tube Part of the unit that provides a casing for
power transmission shaft.
Description
12. Cutter assembly adjustment lever Provides secure
hand grip for adjusting cutting blade angle.
13. Hedge trimmer cutter assembly
14. Latch lock Fixes the angle of the cutter.
15. Latch release Safety device to prevent the latch lock
from being released unexpectedly.
16. Gear housing assembly Gear housing contains drive
gears for transmitting power to cutting blades.
17. Cutter bar and cutter blades That part of the assembly
of cutter blade and shear plate together with any sup-
porting part, which performs the cutting action.
18. Blunt extension An extending blunt part of the cutting
device.
19. Blade cover When transporting or storing the product al-
ways fit the blade cover.
20. Suspension point Device on which the strap can be
hooked.
21. Shoulder strap An adjustable strap to suspend unit.
22. Starter handle Pull handle to start the engine.
14