Publicité
EC140002
SPECIAL TOOLS
The proper special tools are necessary for complete and accurate tune-up and assembly. Using the
correct special tool will help prevent damage caused by the use of improper tools or improvised tech-
niques. The shape and part number used for the special tool differ by country, so two types are provid-
ed. Refer to the list provided to avoid errors when placing an order.
NOTE:
9
For U.S.A. and Canada, use part number starting with "YM-", "YU-" or "ACC-".
9
For others, use part number starting with "90890-".
Part number
YU-1135-A, 90890-01135
YM-1189, 90890-01189
YU-1235, 90890-01235
YU-3097, 90890-01252
YU-1256
YU-90050, 90890-01274
YU-90050, 90890-01275
YM-1277, 90890-01277
YU-1304, 90890-01304
YM-1312-A, 90890-01312
YM-01470, 90890-01470
Tool name / How to use
Crankcase separating tool
These tool is used to split the crankcase as well
as remove the crankshaft from either case.
Flywheel puller
This tool is used to remove the flywheel magneto.
Rotor holding tool
This tool is used when loosening or tightening the
flywheel magneto securing nut.
Dial gauge and stand
Spark plug hole dial stand
These tools are used to set the ignition timing.
Crankcase installing tool
Pot
Bolt
Adapter
These tools are used to install the crankshaft.
Piston pin puller
This tool is used to remove the piston pin.
Fuel level gauge
Fuel level gauge adaptor
This gauge is used to measure the fuel level in the
float chamber.
SPECIAL TOOLS
YU-1135-A
YM-1189
YU-1235
YU-3097
YU-1256
YU-90050
YM-1277
YU-1304
YM-1312-A
YM-01470
1-7
GEN
INFO
IIIustration
90890-01135
90890-01189
90890-01235
90890-01252
90890-01274
90890-01275
90890-01277
90890-01304
90890-01312
90890-01470
Publicité
