Publicité
REAR BRAKE PAD INSULATOR INSPECTION
BRAKE FLUID LEVEL INSPECTION
EC36b000
REAR BRAKE PAD INSULATOR
INSPECTION
1. Remove:
9
Brake pad
Refer to "REAR BRAKE PAD INSPEC-
TION AND REPLACEMENT" section.
2. Inspect:
9
Rear brake pad insulator 1
Damage ¡ Replace.
EC367001
BRAKE FLUID LEVEL INSPECTION
1. Place the master cylinder so that its top is in
a horizontal position.
2. Inspect:
9
Brake fluid level
Fluid at lower level ¡ Fill up.
a Lower level
ÅFront
ıRear
Recommended brake fluid:
DOT #4
w
9
Use only designated quality brake fluid to
avoid poor brake performance.
9
Refill with same type and brand of brake
fluid; mixing fluids could result in poor
brake performance.
9
Be sure that water or other contaminants
do not enter master cylinder when refilling.
9
Clean up spilled fluid immediately to avoid
erosion of painted surfaces or plastic parts.
3-23
INSP
ADJ
Publicité
