Becker Centronic EC711 Notice De Montage Et D'utilisation page 61

Deleting the desired intermediate position/tilt position
2x
or
2x
or
Upper anti-freeze mechanism
The upper anti-freeze mechanism (if present in the receiver) helps to prevent
the roller shutter from freezing in the upper limit position, as the roller shutter
stops just before the upper stop. The distance from the upper stop is automat-
ically cyclically checked and, if necessary, corrected.
The upper anti-freeze mechanism is deactivated on delivery.
Both limit positions must be set before the anti-freeze mechanism can be ac-
tivated.
The anti-freeze mechanism only works if a permanent stop is
set at the upper limit position of the roller shutter. The anti-
freeze mechanism is not visible until the shading solution has
reached the upper stop from the lower limit position 3 times
in succession.
When both or individual limit positions are deleted, this set
function is deleted as well.
Press the travel button for the desired intermedi-
ate position/tilt position twice within one second.
▻ The shading solution runs to the inter-
mediate position/tilt position assigned
to the travel button.
Press the STOP button and, within 3 seconds, also
press the travel button assigned to the intermedi-
ate position/tilt position and hold the two buttons
down.
▻ The receiver confirms.
► The intermediate position/tilt position is now
deleted.
61 - en