Preparation - Westfalia 306357600001 Notice De Montage

SIARR
01 - 97

PREPARATION

* Remove the bumper (4 screws under the bumper,
and 4 screws under the rear doors) (Van only).
* Remove the shock absorber (Van only).
* Remove the plastic covers under the rails at points S.
* Cut the bumper (see Fig.1) (Van only).
ASSEMBLY
* Place the tapped shims G in the square hole under the rails
at points S (with the shortest part facing forward).
* Attach the angle brackets F to points S with the screw set S.
* Attach parts D and E to the box at points Y and X
with the screw set Y and X depending on the model.
* Attach the crosspiece A and parts D and E at
points V and W with the screw sets V and W.
* Attach the arms B and C to points W and U
with the screw sets W and U.
NOTE :
On the L4 (long) vehicle, drill holes in the rails at points U with a
diameter of 12.5 mm, then enlarge the interior of the inner side of the rails
to a diameter of 21 mm. Insert the crossbraces provided at the points U.
FINISHING
* Attach the ball hitch at points Z with the screw set Z.
* Tighten all screw sets at the points indicated below.
* Remount the bumper and attach it at points T
with the screw set T (Van only).
M16 AC8.8 19,5daNm M12
M16 AC10.9 27,5daNm M10
M12 AC8.8 8,1daNm M10
ASSEMBLY INSTRUCTIONS
TORQUES :
AC10.9 11,4daNm M8 AC8.8
AC8.8 4,7daNm M8 AC10.9
AC10.9 6,7daNm
FASTENING KIT
2 HM12x50 screws
S
2 DEC12 washers
2 HM6x15 screws
T
2 r6,5x20 plain washers
2 HM12x130 screws
2 DEC12 washers
U
2 12,5x36 plain washers
2 HM12 nuts
2 spacers dia. 15/21 Lg.91mm
2 HM10x30 screws
W
2 washers DEC10
4 HM10x40 screws
V
4 DEC10 washers
4 HM10 nuts
2 HM10x40 screws
2 DEC10 washers
X
2 HM10 nuts
2 10,5x27 plain washers
Type Type
SI037 Approval No.
Towbar for
Boxer 09/06 - Ducato
e24*94/20*01*0067
09/06 - Jumper 09/06
Van and Platform
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
FICHIER : BUREAU\NOTICEDEMONTAGE\SIARR\NDM01\NDM0197E - FOLIO NDMANG
306357600001
4 HM8x30 screws
4 DEC8 washers
Y
4 HM8 nuts
4 8x27 plain washers
Van
4 HM10x35 screws pas 125
Y1
4 washers DEC10
4 plain washers 10x27
4 HM10x40 screws
4 DEC10 washers
Y2
4 HM10 nuts
8 10x27 plain washers
2 HM16x45 screws
Z
2 DEC16 washers
2 HM16 nuts
Max. Total Max. Total
Towable Weight
Authori. Weight
3 500 kg 3 000 kg
Van
Van
Platform
Max. Verti- Value
cal load D
150 kg 15,84 kN