HP DeskJet GT 5820 Serie Mode D'emploi page 2

Control Panel
Control panel display: Indicates number of copies, printhead priming state, media errors, wireless
status and signal strength, Wi-Fi Direct status, and printhead problems. For more information
1
about the icons, see the full User Guide at www.hp.com/go/support or the Electronic Help if you
installed the recommended software on your computer.
2
Cancel button: Stops the current operation.
Wireless button: Turns wireless capabilities on or off.
3
Wireless light: Indicates whether the printer is connected to a wireless network or not. A blinking
light indicates that wireless has not been setup or that the printer is attempting to connect.
Wi-Fi Direct button: Turns Wi-Fi Direct on or off.
Wi-Fi Direct light: Indicates the on or off status of Wi-Fi Direct. A blinking light indicates that the
4
printer is connecting to a mobile device in the Wi-Fi Protected Setup (WPS) push mode or there is a
problem of the Wi-Fi Direct connection.
Start Copy Color button: Starts a color copy job. To increase the number of color copies, press the
button multiple times. The number of copies will be shown on the control panel display. Copying
5 will start two seconds after the last button press.
Note: You can generate a print quality diagnostics report by pressing and holding the Start Copy
Color button for 3 seconds.
6
Power button: Turns the printer on or off.
7
Printhead Alert light: Indicates printhead problems.
Resume button: Resumes a job after a disruption (for example, after loading paper or clearing a
8 paper jam).
Resume light: Indicates the printer is in a warning or error state.
Information button: Press this button to print information about how to wirelessly connect your
9
printer to your network or directly to your computer and mobile devices.
HP ePrint button: Turns HP ePrint on or off.
10
HP ePrint light: Indicates the on or off status of HP ePrint. A blinking light indicates a problem with
the connection to Web Services.
Start Copy Black button: Starts a black-and-white copy job. To increase the number of black-and-
11
white copies, press the button multiple times. The number of copies will be shown on the control
panel display. Copying will start two seconds after the last button press.
2