Publicité
Les langues disponibles
Les langues disponibles
CHARGER/CONTROLLER LED DISPLAY
When the System Alert light IS NOT flashing, refer to Figure 6.
When the System Alert light IS flashing, refer to Figure 7 .
CONTROL BUTTON:
RESULT OF PUSHING BUTTON:
System Test
Pump starts and all LEDs light up.
Will reset the pump Activity LED.
When pushed with the Silence Alarm button, the Charger/Controller microprocessor resets and error code resets.
Silence Alarm
Toggle; Prevents the audible alarm sounding. Press and release to reset.
Light
Toggles the light on the Charger/Controller on and off.
Press and release Test System and Silence Alarm to reset system.
System Reset
14
Figure 7: Error Code Displays (LEDs Flashing)
Table II: Control Button Functions
HYD979 (06-08-20)
Publicité
