Publicité
Les langues disponibles
Les langues disponibles
Carpet
cleaner
description
17
2O
The assembled
carpet cleaner will look like the drawing.
1. Hand grip
2. Solution
trigger:
press to
release clean solution.
3. Clean Surge
TM
button
4. Cord clip: place cord in
clip to keep it out of the
way when using cleaner
5. Hose
6. Hose holder:
wrap hose
around holder and hooks
for storage.
7. Hose hooks
8. Cord hooks:
wrap cord
around hooks for storage.
The top hook can be rotat-
ed right or left for quick
and easy cord release.
9. Stair/upholstery
nozzle
10. Carrying
handle
11. Clean solution
tank
handle
12. Clean solution
tank cap/
measuring
cup
13. Clean solution
tank:
holds cleaning solution.
14. Recovery tank lid
15. Recovery tank: holds
dirty solution.
16. Recovery tank front
panel
17. Hood
18. Brush speed selector:
slide selector to set brush
speed on HI, LO, or OFF.
19. Brush indicator: spins
when brushes are rotating.
20. Nozzle
21. Solution tube connection
22. Recovery tank latches
23. ON/OFF pedal
24. Handle release pedal:
step on pedal to lower
handle to operating
(floor)
position.
This carpet cleaner is intend-
ed for household
use.
Operate carpet cleaner only
at voltage specified
on data
plate on back of cleaner.
Plug carpet cleaner into a
properly grounded
outlet.
OIN/OFF
pedal
&
Handle
release
pedal
Step on pedal (A) to turn carpet
cleaner on. Step on pedal again to
turn carpet cleaner off.
Step on pedal (B) to lower handle to
operating position. Handle does not
lock into a single position but "floats"
to allow convenient operation.
|
To transport
To move your carpet cleaner from
room to room put handle in upright
and locked position tilt carpet
cleaner back on wheels and push
forward.
The carpet cleaner may also be lift-
ed by placing a hand under the
upper clean solution tank handle as
shown.
Continued
-_
7
Publicité
