Publicité
Les langues disponibles
Les langues disponibles
Theassembled c leaner w ill looklike
thisdrawing.
Attach
upper
handle
Remove clean solution tank (upper
tank) from carpet cleaner.
|
!
With cord hook (A) to back d carpet
cleaner, push upper handle down onto
lower handle. Push bolts into holes on
front of handle. If bolts will not go
through hole easily handle is not
pushed completely down.
B
Attach
hose
holder
Position hose holder (B) onto handle
by matching tabs on rack with
openings on back of handle. Make
sure bolts are through holes.
-\
Place nuts in recessed areas on
back of hose holder. Hold each
nut in place while tightening each
bolt securely (from the front of the
handle) with a Phillips screwdriver.
Only two nuts are needed on this
model. The extra nut is not required
but has been provided for your con-
venience.
|
D.
When handle sections
are com-
pletely together,
squeeze trigger
(C) and depress
Clean Surge
TM
button (D) on upper handle.
You will hear a "snap" when the
trigger
rod is in place.
Attach
tool
holder
Remove tool and taped screw from
holder. Insert projections on holder
into slots on back of cleaner.
Slide holder down into place. Insert
screw at (D) and tighten with a
Phillips screwdriver.
Replace clean solution tank (upper
tank) by positioning bottom first.
Press on tank handle to snap top of
tank into place.
Continued->
5
Publicité
