Publicité
Les langues disponibles
Les langues disponibles
Keep handles and grasping surfaces dry, clean and free from
oil and grease. Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in unexpected
situations.
Battery tool use and care
A charger that is suitable for one type of battery pack may create
packs. Use of any other battery packs may create a risk of injury
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together
Under abusive conditions, liquid may be ejected from the
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
temperature.
cause explosion.
Follow all charging instructions and do not charge the battery
instructions. Charging improperly or at temperatures outside the
Service
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs
should only be performed by the manufacturer or authorized
service providers.
Caulking Gun Safety Warnings
Gases from adhesive or sealant may cause irritation to the
operator's skin or respiratory system. Always use personal
protective equipment and wear an appropriate mask.
Keep hands out of the piston and rod area of the caulking gun.
Fingers can be pinched between the tube holder and the piston.
Never reach into the danger area of the product when it is
running.
vibrations or if other malfunctions occur. Check the product in
Secure your workpiece with a clamping device. A workpiece
clamped with clamping devices or in a vice is held more secure
than by hand.
Always wait until the product has come to a complete stop
before placing it down. The tool insert can jam and lead to loss
of control over the power tool.
Do not open the battery. Danger of shortcircuiting.
Protect the battery against heat, e.g., against continuous
In case of damage and improper use of the battery, vapours
may be emitted. Provide for fresh air and seek medical help in
case of complaints. The vapours can irritate the respiratory system.
Use the battery only in conjunction with your Würth power
tool. This measure alone protects the battery against dangerous
overload.
Use only original Würth batteries with the voltage listed on
the nameplate of your power tool. When using other batteries,
e. g. imitations, reconditioned batteries or other brands, there is
danger of injury as well as property damage through exploding
batteries.
Use only original Würth accessories.
Cordless Caulking gun
Article number
Voltage
No load speed
Weight (According to EPTA procedure
01/2014)
Weight - not incl. battery pack
Ambient operating temperature for the
tool and battery pack
Ambient storage temperature for the
tool and battery pack
Recommended ambient charging
temperature
Recommended battery type
Recommended charger
Know Your Product
See page 3.
1. Cartridge holder
2. Plunger rod
3. Trigger
4. Trigger lock
5. Speed dial
6. Battery pack
7. Belt clip
Intended Use
The caulking gun is intended for the following applications:
Sealing cracks to keep your home's conditioned air inside while
keeping unconditioned air outside, increasing your home's energy
Filling holes and cracks before painting.
Creating a moisture barrier around areas which could be
damaged by water.
Sealing cracks to keep insects from crawling inside your home.
Applying adhesive.
Danger of explosion.
AKP 12 COMPACT
5701 107 00X
12 V/DC
0–83.8 cm/min
2.055 kg (2.0 ah) –
2.065 (3.0 ah)
1.809 kg
0 - 40°C
0 - 27°C
5 - 40°C
LI 12V/2 Ah BASIC
LI 12V/3 Ah BASIC
ALG 12/2 BASIC
ALG 12/3 BASIC
14
Publicité
