Mounting The Outdoor Sensor - Cresta DTX390 Mode D'emploi

MOUNTING THE OUTDOOR SENSOR

We suggest you to hang the outdoor sensor as indicated here under, better not stand it at
an outside place. Try to avoid direct sun shine or rain as much as possible.
If there is no reception due to a bad reception, or failure of a the RCC automatic time
signal it is possible to set the time manually, please follow the steps here under:
MANUAL TIME SET-UP
• Press and hold key the "MODE" button for 3 seconds.
• The 12/24 hour icon is flashing. Use the "∧•MEM" and "∨•HISTORY" button to select.
• Press the "MODE" button to confirm.
• The display for the time zone is flashing. Use the "∧•MEM" and "∨•HISTORY" button to
select the time zone(-12 to +12).
• Press the "MODE" button to confirm.
• The display for the D and M format is flashing , Use the "∧•MEM" and "∨•HISTOR " button
to select
• Press the "MODE" button to confirm.
• The display for the year is flashing. Use the "∧•MEM" and "∨•HISTORY" button to select the
year.
• Press the "MODE" button to confirm.
• The display for the month is flashing. Use the "∧•MEM" and "∨•HISTORY" button to select
the month.
• Press the "MODE" button to confirm.
• The display for the date is flashing. Use the "∧•MEM" and "∨•HISTORY" button to select the
date.
• Press the "MODE" button to confirm.
• The display for the hour is flashing. Use the "∧•MEM" and "∨•HISTORY" button to select the
hour.
• Press the "MODE" button to confirm.
• The display for the minutes is flashing. Use the "∧•MEM" and "∨•HISTORY" button to select
the minutes.
• Press the "MODE" button to confirm.