Cresta DTX390 Mode D'emploi page 19

• The language selection for the display of the weekdays is flashing. Use the "∧•MEM
" and "∨•HISTORY" button to select the language.
• Press the "MODE" button to confirm
• The hPa unit of air pressure is flashing. Use "∧•MEM" and "∨•HISTORY" button to select
hPa/ inHg.
• Press the "MODE" button to confirm
• The temperature °C is flashing. Use the "∧•MEM" and "∨•HISTORY" button to select °C and
°F
• Press the "MODE" button to confirm
INFORMATION
• The clock automatically changes from the set-up mode to the time display mode if no
keys are pressed for 20 seconds.
• Explanation for the time zone display:
You can manually adjust the clock to the time zone of a country (up to 1500km
distance to Frankfurt/Main) where the clock receives the DCF signal but where the
actual time differs from the time received.
If, e.g. the time in a given country is 1 hour ahead of the German time, set the time
zone display to 01. The clock is now DCF controlled but the time is one hour ahead.
DAILY ALARM SET-UP
• Press the "MODE" button to switch from the time display to the A1 display
• Press and hold the "MODE" button for 3 seconds , the flashing alarm time is shown
• The hour display of the alarm time is flashing. Use the "∧•ME " and "∨•HISTORY" button to
select the hour.
• Press the "MODE" button to confirm.
• Then follow the minutes. Use the "∧•MEM" and "∨•HISTORY" button to select the minutes
• Press the "MODE" button to confirm.
• Then press the "MODE" button to switch from the A1 display to the A2 display
• The same setting procedure is to follow for Alarm 2 as for A1.
DAILY ALARM ON/OFF
• When the A1 alarm time is showing, press the "
the alarm 1 with the alarm symbol showing in the display.
• Press the " " or "
∧•MEM
• When the A2 alarm time is showing, press the "
the alarm 2 with alarm symbol showing.
• Press the " " or "
∧•MEM
INFORMATION:
• The clock automatically changes from the set-up mode to the time mode if no keys
are pressed for 20 seconds.
• The alarm sounds for 2 minutes if no key is pressed to stop it and will then switch off
automatically.
" button again to deactivate the alarm
∨•HISTORY
" button again to deactivate the alarm
∨•HISTORY
" or " " button to activate
∧•MEM ∨•HISTORY
" or " " button to activate
∧•MEM ∨•HISTORY