Publicité
Les langues disponibles
Les langues disponibles
BLOWING FUNCTION INSTRUCTION
1 . Connect the hose to the rear blow window.
2. Plug and switch on the machine .
MAINTENANCE AND CLEANING
Make sure that the machine is not live when carrying
out maintenance work on the motor .
• Regularly clean the machine housing with a soft cloth,
preferably after each use . Keep the ventilation slots free
from dust and dirt .If the dirt does not come off use a soft
cloth moistened with soapy water . Never use solvents
such as petrol, alcohol, ammonia water, etc . These sol-
vents may damage the plastic parts .
• The machine requires no additional lubrication .
• Should a fault occur, e .g . after wear of a part, please con-
tact your local BORT GLOBAL LIMITED dealer .
DISPOSAL
Discarded electric appliances are recyclable and
should not be discarded in the domestic waste!
Please actively support us in conserving resources
and protecting the environment by returning this
appliance to the collection centres (if available) .
In order to prevent the machine from damage during
transport, it is delivered in a sturdy packaging . Most of the
packaging materials can be recycled . Take these materials
to the appropriate recycling locations . Take your unwanted
machines to your local BORT GLOBAL LIMITED dealer . Here
they will be disposed of in an environmentally safe way .
Noise/Vibration Information
Measured in accordance with EN 60745-2-11 the sound
pressure level of this tool is 89 dB(A) and the sound power
level is 101,1 dB(A) (standard deviation: 3 dB), and the vi-
bration is 7,9 m/s
(hand-arm method) .
2
Declaration of Conformity
We declare under our sole responsibility that this product
is in conformity with the following standards or standard-
ized documents: EN 60745-1, EN 55014-1, EN 55014-2, EN
61000-3-2, EN 61000-3-3, in accordance with the regula-
tions 2006/42/EC, 2006/95/EC, 2004/108/EC, 2011/65/EU .
6
Publicité
