BORETTI M-system MI-76 Notice D'emploi page 55

Use of the appliance
Display Designation
0. Zero
1...9 Power level
U Pan detection
E Error message
H Residual heat
P Booster
L Locking
Ventilation
The cooling system is fully automatic. The cooling fan starts with a low speed when the calories
brought out by the electronic system reach a certain level. The ventilation starts his high speed
when the hob is intensively used. The cooling fan reduces his speed and stops automatically when
the electronic circuit is cooled enough.
Starting-up and appliance management
Before the first use
Clean your hob with a damp cloth, and then dry
the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the
glass surface.
Induction principle
An induction coil is located under each hea-
ting zone. When it is engaged, it produces a
variable electromagnetic field which produces
inductive currents in the ferromagnetic bottom
plate of the pan. The result is a heating-up of
the pan located on the heating zone.
Of course the pan has to be adapted:
• All ferromagnetic pans are recommended
(please verify it thanks a little magnet):
cast iron and steel pans, enamelled pans,
stainless-steel pans with ferromagnetic
bottoms...
Function
The heating zone is activated.
Selection of the cooking level.
No pan or inadequate pan.
Electronic failure.
The heating zone is hot.
The boosted power is activated.
Control panel locking.
• Are excluded: cupper, pure stainless-steel,
aluminium, glass, wood, ceramic, stone-
ware,...
The induction heating zone adapts automatical-
ly the size of the pan. With a too small diame-
ter the pan doesn't work. This diameter is va-
rying in function of the heating zone diameter.
If the pan is not adapted to the induction hob
the display will show [ U ].
Sensitive touch
Your ceramic hob is equipped with electronic
controls with sensitive touch keys. When your
finger presses the key, the corresponding com-
mand is activated. This activation is validated
by a control light, a letter or a number in the
display and/or a "beep" sound.
In the case of a general use press only one key
at the same time.
NL
FR
D
EN
55