Parkside 270382 Traduction Des Instructions D'origine page 4

GB IE
Content
Introduction ................................. 4
Intended purpose ........................... 4
Functional description .................. 5
Overview ..................................... 5
Technical specifications ................. 5
Safety information ......................... 5
Initial Operation ........................... 6
Cleaning/Maintenance/Storage .... 7
Waste disposal and environmental
protection .................................... 7
Service-Center ................................ 7
Importer ...................................... 7
4
Introduction
Congratulations on the purchase of your
new device. With it, you have chosen a
high quality product.
The operating instructions constitute part of
this product. They contain important infor-
mation on safety, use and disposal.
Before using the product, familiarise your-
self with all of the operating and safety
instructions. Use the product only as de-
scribed and for the applications specified.
Keep this manual safely and in the event
that the product is passed on, hand over
all documents to the third party.
Intended purpose
The pipe cleaning set clears blockages
from pipes, down pipes, drains and toilets.
The equipment is intended for use with the
Parkside pressure washers PHD 100 A1,
PHD 100 B2, PHD 100 C2, PHD 100 D2,
PHD 100 E2, PHD 150, PHD 150 A1,
PHD 150 B2, PHD 150 C2, PHD 150 D3.
Operating pressure (Rated pressure) max.
110 bar. The equipment is suitable for the
following pipes:
- Curve C no more than 90°;
- Diameter D at least 40 mm;
- Radius R at least 70 mm.
K = 90°
max
D = 40mm
min
R = 70mm
min